Nissan 350Z ECU Reset

A Lil sumthin my Geeks in Cali stumbled on. Thanks them with naked cartoons if you see them.


Confirm that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds.

Repeat the following two procedures quickly five times within 5 seconds:

1. Fully depress the accelerator pedal (HARD).

2. Fully release the accelerator pedal.

3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.

4. Fully release the accelerator pedal (while the CEL is still blinking)

5. Wait about 10 seconds.

6. Fully depress the accelerator pedal and keep it for more than 10 seconds.

7. Fully release the accelerator pedal (The CEL light will continue to blink).

8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone.

Try and let me know if this works.

Yep, it works been there done that alot waking up the neighbors 2 in the morning. Its a pain to do if you dont get the timing down.